How to Fit a New Meter Box

Home improvement
Pin it

An electric meter is a gadget that quantifies the measure of electric energy devoured by a structure, inhabitant space, or electrically fueled gear for power. One can discover electric meter at any spot, for example, family units, business spot,s or industry. For charging purposes, electric utilities utilize electric meters introduced at clients’ property to quantify electric energy conveyed to their clients.

It is not uncommon to need to learn how to fit a new meter box. There are many reasons that you may need to repair or replace one of these units. Some people will replace these because they are broken or old. Others simply need to find a good replacement because they no longer have one of the old ones that is working properly. Regardless of why you need to replace one of these units, there is a good chance that you can learn how to do it yourself.

If you are able to successfully repair the unit yourself, there will be few things that you will need to know in order to complete the job. The first thing that you will need to know is what type of meter you have.

The second thing that you need to know about how to fit a new meter box is how to install it. This is the most difficult part of the whole process, as most people do not have experience installing these units. The first thing that you will need to do is locate your box. It is normally a good idea to have a professional do this for you, particularly if you have never installed a meter box before. For more information about Electric Meter box, visit a site like https://www.meterbox.co.uk/electric-meter-boxes

The power must be turned off prior to changing the box. Your utility company can come out to turn the power off and replace the box for you or come and turn off the power so you can change the box yourself.

The process

  • Eliminate the old entryway on the off chance that it is as yet present
  • Eliminate all bundling from the new unit and eliminate the key on the rear of the entryway.
  • Open the entryway with the key
  • Offer the new unit up (it should slide over the current unit)
  • It might be important to change the casing to oblige non-standard gas establishments
  • Imprint one side of the composite box with a marker pen or comparable
  • Drill four little openings at the imprints to suit the screws
  • Offer up the unit again and secure the one side of the metal meterbox with four screws
  • Utilize the soul level to ensure the case is straight
  • Imprint the opposite side of the composite box with a marker pen or comparative
  • Drill four little openings at the imprints to suit the screws
  • Secure the two different sections with four screws, affixing to the interior composite box
  • Close the entryway and secure locks
  • We suggest that the top edge and sides are attached to the divider with an appropriate silicone seal
  • Clean up and discard all refuse in a naturally benevolent manner

Suggested instruments

  • Marker pen
  • Drill
  • Bore to suit screws
  • 4 x 13 mm self-tapping screws
  • Reasonable screwdriver
  • Soul level
  • Outer silicone

what’s more, around ten minutes of your time.